Hi. I just bought me a nextion 4.3 enhanced. I connected it to an
arduino mega and uploaded my file to the nextion. Im Having 2 problem
1. im struggling to communicate through the serial port. I did config the nexconfig file and added it to my sketch but still no success
while figuring out the code and why it wont work through the serial
port i left the screen connected to the arduino mega (using the 5v and
Gnd). I disconnected the usb to the board and reconnected it and the
screen never went back on.
I then tested and confirm the 5v to the screen and there is 5v.
I tried uploading my file to the screen and it successfully uploads but still no display
i am a newbie to this any help will be appreciatedThank you
This forum closed. New forum open https://nextion.itead.cc/