Start a new topic

Auto off timer.

When my pir2 or door sensor turn lights on .I need time option 1 - 3 min to auto off.

6 people like this idea

Try Setting Loop timer as follows for your Light & hope it will work. (just a logic based on my experience)


Loop Timer-> Restart Cycle = OFF

Check After Checkbox ->  Set Min to 2 Mins

Enable & OK


Let me know your feedback


They need to change this to make it far more obvious that this is possible. By definition only the first part of a loop is not a loop because it doesn’t loop back to the start. Unless someone had previously set a loop up they wouldn’t have even noticed you can only do part of 1 loop.

1 person likes this
Login or Signup to post a comment