Start a new topic

More then 1 RF Bridge Button in a scene of eWeLink

I have 3 lamp drive by rf remote 1 button for on 1 button for off each, they are correctly associated with RF Bridge (3 RF remote with 2 buttons).


I want to create a scene to trigger all the lamp on, but I CAN'T in "execute" i can only add 1 RF bridge button no more, when i try to add more the app eWeLink substitute the other command. It is normal? There is a solution?



3 people like this idea
1 Comment

I have also a couple of lamps (powersupply via SonOFF Basic, S20, S26 and SonOFF RF)

And I use a scene for "Entering the room"  (which executes POWER ON for some of these items)

and a second one for "Leaving the room" (this one shuts down all my devices).


Both actions are triggered by one 433MHz Wall-mounted Switch (ON/OFF). 

But to the bridge this switch is registered as two different ALARMs.

The problem is, that my Switch is a double-Switch: a left half with ON/OFF and a right half with ON/OFF.

And so the full bridge is occupied by this single Switch....   :-(


Today a third SonOFF RF Bridge arrived and so I tried to define one side of my switch as an Curtain:

ON/OFF as usual, STOP ignored.


But in this case I can't use it as a trigger to my scene any more.


Why isn't it possible to use Curtain-Buttons as a trigger in a scene???

Login or Signup to post a comment