hi. I have a problem like this:
I sleep with my thsp command. When I touch, I wake up to the page I want with the wup command. But I want to go to a screen 10 seconds before sleep and sleep like this.
how can I do that? Thanks for your help
First of all, my sleeping codes are as follows:
thsp = 60 // sleep after 60 seconds
thup = 1 // wake up after 1 second when touching screen
wup = 16 // go to page 16 when wok
I want it like this:
when the screen is not touched
1) Go to page 16 after 50 seconds
2) even when you are not touching the screen while page 16 is on,
3) go to page 16 while the screen wakes up
How can I do these steps?
In short, I want to do the following:
If the display is untouched within 50 seconds, go to page 16. If the screen is not touched in 60 seconds, the screen goes to sleep mode. :-)
You already defined the steps in stating your requirement
- if the screen is touched at 52 seconds, just before sleeping
it will be on "page 16" as you desired
Now you only need to implement what you spec'd as requirement
Since a waveform or radio button component can't assist,
- there is only one component Nextion side that can be used
Or it can be implemented MCU side
how can i do it .
I need to go to page 16 if it is not touched for 50 seconds.
When I set thsp = 50, it sleeps if the screen is not touched in 50 seconds.
I'm still waiting for your answers :)
during the time you wait, did you try any on yourself to do things by yourself, or you just wait until somebody spend his spare time to do your things?