Start a new topic

Nextion HMI with a FPGA

Hi,


I'm would like to use the Nextion HMI display in combination with a Xilinx Artix-7 FPGA.

Does anyone has any experience with this display and a FPGA?


Thom

1 Comment

You don't need any special experiences, as long as your choosed FPGA can simply drive a serial output ... how to use a serial out on FPGA side, that's something you must find out by yourself ...


btw. you forgot to mention, that this all is for your school-project ... so, your learning ... :-)


The Nextion is accepts much of its commands via text over serial
These commands can be found in the Nextion Instruction Set located here
http://wiki.iteadstudio.com/Nextion_Instruction_Set

As well as the list of Nextion commands, the Nextion Instruction Set also has
A list of the valid Nextion Return Codes and the format of the expected data being returned.

Other samples and Tutorials can be located in the Itead Blog located here
https://www.itead.cc/blog/

Further Information can be found in the posts in the Announcement section of the Forum
Nexion FAQs
http://support.iteadstudio.com/support/discussions/topics/11000002523
Nextion Users manual
http://support.iteadstudio.com/support/discussions/topics/1000065323

Login or Signup to post a comment