Folks - I have an NX4024T032 with some buttons and text which I wish to change via the serial input port. I am able to do everything I wish via the Nextion Editor output window (bottom left of the screen) but when trying the same with a terminal program I don't get any change. For example page2.p0.pic=1 or page2.p0.pic=0 toggles the p0 picture correctly from the Editor but not from a terminal program.
I have sent the ffffff after the command to no avail. Where am I going wrong here?
All help is appreciated.
Solved - I needed to send the character for ff which is ÿ three times after the command (ÿÿÿ for ffffff) then everything worked as expected.