Start a new topic
Solved

Touch Press and Touch Release Event switched in V0.33

 According to the published instruction set,

"Definition of TouchEvent: Press Event 0x01, Release Event 0X00"


When I choose to "Send Component ID" under Touch Press Event in V0.33,

it sends "0X00".

When I choose to "Send Component ID" under Touch Release Event, it sends"0x01"


So either the instruction set is backwards (switched) or the editor has a bug.


The work around is to just keep in mind it is backwards.


1 Comment

If this has been an issue in v0.33 it is no longer an issue in v0.38

As per the published instruction set,

Pressed Event is 0x01 and Released Event 0x00.


As this issue is now historic, it will now be marked as solved.