I bought a Iboard, and I need to know how to program a new sketch over it, using the IDE arduino, or what I need to program the atmega328 in it.
I hope you help me!
I suffer from the same problem.
I have already try setting it to Duemilio.. with Atmega328p, my foca is recognized by my OS, I see the comport on arduino ide, Nevertheless I am getting sync errors. I have tried it on two different IBoards
I had a trouble with my foca voltage leves, I fixed it and then works good setting to duemilanove board.
the Iboard works good
And How did you fixed it? There is a switch on foca which changes 3.3 to 5V. Mine is at 3.3V position is currently.
yes, I change the position of the switch. cuz it was in 5V
In this case, it won't solve my problem because it is already setup for 3.3V :(
That is a very good answer. Just wonderful. Truly, I am amazed at what informative things you've told us today. Thanks a million for that. judi bola
This is really amazing. Such detail!
Looking forward to seeing the finished piece.
<a href="http://siampoker.com ">poker online</a>
Iboard does not compile any code. I've tried everything. I'm using FTDI32Help me !!